Quick Reference Guide Owner's manual

ManualsBrandsFranklin Fueling Systems ManualsEquipmentT5 Series Fuel Management System

Home Status

Navigation Icons

Back: Moves back one screen.

Scroll Up: More options available above.

Scroll Down: More options available below.

Text Entry Box

Character Selection: Selects between upper/

lower case letters and numerals/symbols.

Backspace: Deletes the last character input.

Clear: Deletes all of the data in the text box.

Enter: Saves the data entered.

Cancel: Exits without saving.

Restore Default: Returns to original settings.

User Role Icon Key

The User Role icon indicates the current level of access. This

icon is used in this guide to indicate the access level needed

to perform certain functions.

Guest

Guest level access

User

User level access

Admin

Administrator level access

Note: Pressing the User Role icon will return the current

access level to Guest.

Alarm Status LEDs & Annunciator

Red Alarm LED – Flashes with Tank, Sensor

and Line alarms.

Yellow Warning LED – Flashes with Active

System Warnings.

Green Power LED – On when power is

applied to the console.

Note: Alarms automatically clear when the conditions that

caused them are corrected. Indicator lights will stop

ashing when there are no alarms.

View Active Alarms

to view all Active alarms.

Note: Pressing this button will display active alarms only.

When the Alarm Condition button is a Checkmark,

there are no active alarms.

Clear Active Alarms

A certied technician can help diagnose alarm issues that

might come up, so it’s a good idea to have your Service

Company’s information close at hand.

Name Number

(

)

–

(

)

–

Note: Alarms cannot be cleared manually. Alarms will clear

automatically when the condition that created the alarm

has been corrected.

To Display...

• Gross Volume • Net Volume

• Gross Level • Water Volume

• Product Temperature • Water Level

By Tank or Manifold

the FMS button.

Up to 6 tanks with gross volume are

displayed.

to display more tanks, if applicable.

the Tank that you want details on

(gross level, product temperature, etc.).

Inventory

Summary

Inventory

Details

Note: Pressing the Print button

while viewing

Inventory Summary will print an inventory

report for all tanks.

Summary of content (2 pages)

PAGE 1
User Role Icon Key The User Role icon indicates the current level of access. This icon is used in this guide to indicate the access level needed to perform certain functions. Home Status Guest Guest level access User User level access Admin Administrator level access Red Alarm LED – Flashes with Tank, Sensor and Line alarms. Yellow Warning LED – Flashes with Active System Warnings. Green Power LED – On when power is applied to the console. Scroll Up: More options available above.
PAGE 2
To Enter a Password When trying to perform an operation that requires a higher access level than you currently have, you will be prompted for a password. When you’re asked for a password, enter in the necessary information using the buttons shown under the Navigation Icons header. Press the Enter button after you have finished entering in your password. To Force a Tank or Line Leak Test the FMS button. Tanks are displayed here. View Alarm History the Main Menu button. the Application Menu button.