Upgrade

1
These instructions are for upgrading or adding software
options to a T5 Series or Colibri console using the TSA
Upgrade Tool.
Important: Before attempting any upgrade, download
and save the most recent setup le to your
computer.
Note: Do not upgrade EMS consoles used with balance
systems (see Tech bulletin TB0110-02).
Download Upgrade Firmware
The upgrade rmware can be downloaded from our
website OR can be ordered from Franklin Fueling Systems
on a USB memory stick. Part # TSA-UPGMS for T5 Series
(EVO not included), Part # CL-UPGMS for Colibri. There is
no USB memory stick option available for the TS-550 evo.
The TS-550 evo must use the website download option.
• To download from the website, go to www.
franklinfueling.com. Select Service \ Software
Downloads.
• The Software Downloads are separated into
Colbri, T5 Series, and TS-550 evo Software
Downloads. Click on the appropriate version. Fill
in the Contact Information and click Download
Software.
• To download from the USB memory stick.
Insert the USB memory stick into the USB port of the
computer that will be used to perform the Software
Upgrade. Browse to the le to select it.
Ts au.exe
The downloaded le will be named by the version
(example T5S1545341.exe). After downloading,
the user will be prompted to run the le and
this will open the extraction utility and the user
must select the destination for the les or accept
the default destination. Once the extraction is
complete then TSAUpgradeTool.exe will start.
Connection parameters
Default settings for the connection parameters are as
follows:
• Address: 192.168.168.168 is the default for a tank
gauge console and is what will be used as a IP address
when connecting with the Ethernet crossover cable.
If you are upgrading the console remotely, enter the
correct IP address of the console here.
• Port: port 80 is the default port setting for the consoles
• Password: the default password for the tank gauge
console is admin and is entered as a default on the TSA
Upgrade Tool. If the password on the console has been
changed, enter the correct password here.
After the connection parameters are entered correctly, click
the QUERY button. This will connect the TSA Upgrade
Tool to the T5 series console and retrieve the registration,
rmware and database information from the console.
The identication information will be entered automatically
from the console. No information has to be manually
entered in here.
Registration Tab
Under the registration tab you will see all available options
for the tank gauge console.
“Current” will either have a yes or no. If there is a yes, the
console has that specic option already installed. If no,
then the option is not installed on the console.
If the TSA Upgrade Tool was received in response to an
order for a new Software Option, the “Available” column
will list the purchased option as yes. For example, if your
console does not have SCALD Testing, the “Current” entry
for SCALD testing will have NO and the “Available” column
will state YES (If the SCALD option has been purchased).
TSA Upgrade
Installation Instructions