User's Manual

Activating your device

Activating LTE Data Service

① After inserting your SIM card, power up the CPE router, and connect the router with your PC (LAN or Wi-Fi).

② Open your Web browser and enter

http://192.168.1.1/ into the address window. Enter your username and

password in the Login dialog. (See more detail in Chapter 4)

③ Once connected, check the ‘USIM State’ of the WWAN Device Status item in the WWAN menu.

A. If your SIM card did not activate properly, you will see the USIM State as ‘

Inactive’ as shown below.

.’

B. If your SIM card activated correctly, you will see the USIM State as ‘

Active’ as shown below.

Warning

If your SIM card did not come pre-activated or you need to re-activate your SIM card, you may need to:

A. Go to your network operator’s retail store.

B. Contact your network operator’s customer service department.

In case of using damaged SIM cards, locked SIM card or no SIM Card, you will see an error.