User's Manual

Page 35 / 48 Copyright © 2013 Franklin Wireless Corp.
Chapter 4
Interface and Settings for Voice Call Service (if applicable)
User Menu
 Voice User Menu Instructions
To alter voice options, pick up the handset and enter the appropriate code as listed in the table below. For detailed
information on the voice options listed in the table, please refer to the detailed description in the following section(s).
.’
Menu Tree
Entry Code
1. Ring / Sound
1. Ring Type
11
2. Volume Level
12
3. DTMF Tone Length (Long or Short)
13
4. 1Min Alert
14
5. Svc Alert
15
2.Tools
1. Caller ID
21
2. Dial Tone
22
3. Time
1. Auto Send Time
31
2. Flash Time
32
3. On Hook Time
33
4. Activating
1. New Lock Code
41
2. Outgoing Restrict
42
3. Reset Phone
43
4. Voice Privacy
44
For example, an entry code: ‘##XX’ (where ‘XX’ is a two digit code in the table above).
##11  to go to Ring Menu (option 1) and then select the Ring Type (option 1 in sub menu)
##12  to go to Ring Menu (option 1) and then select the Volume Level (option 2 in sub menu)
Note:
Users will be able to hear a tone after every menu selection, such as a confirmation tone or a “fail” tone.