User's Manual

Page 39 / 48 Copyright © 2013 Franklin Wireless Corp.
Setting Menu (Option 4)
New Code
(Option ##41)
- This menu will allow you to change a lock code (the default code is ‘0000’).
- Enter ##41, you will hear a confirmation tone.
- Enter the current lock code to get a permission to change a lock code.
- If the entered current lock code is correct, you will hear a confirmation tone.
- After confirmation, you can enter new lock code. The processes of an entering new lock code have two steps:
1) First, you should enter a new lock code and press ‘’ key.
2) Enter the lock code again for double verification and press ‘.’
- If first code and second code was matched, a confirmation tone will be heard. Otherwise, the codes are different, you will
need to restart the process again.
- Press ‘#’ to cancel.
Ex) Suppose that the current lock code is ‘7777’, and user wants to change it to ‘8888.’
##41  confirmation tone  7777  confirmation tone  8888  Press  8888  Press  confirmation tone
Restrict outgoing
(Option ##42)
- You can restrict outgoing calls using this option.
- You can set a restriction by pressing .
- Press ‘#’ to cancel.
Reset phone
(Option ##43)
- You can reset this terminal to make a default factory value.
- You can reset a terminal by pressing ‘.’
- Press ‘#’ to exit the reset menu.
Voice privacy
(Option ##44)
- You can set the option of Voice privacy to protect your call from being tapped (this feature must be supported by the
wireless operator).
- You can change the option by doing follows.
- Press ‘’ for changing a current value to ‘Standard’ option
- Press ‘#’ for changing a current value to ‘Enhanced’ option.
Example - Suppose a current lock code ‘7777’