User's Manual
Page 9 / 48 Copyright © 2013 Franklin Wireless Corp.
Installing the Antennas
To install the antennas, follow these steps:
① Align the antennas with the antenna posts on the CPE router as shown below.
② Mount the antennas on the antenna posts.
③ Swivel the antennas in any direction and check placement to improve signal.
Note:
These two external antennas are required for proper 4G LTE service; please position these antennas on a right angle to
each other for the best 4G LTE signal reception.
Charging the battery
① Open the battery door at the back panel of CPE router.
② Insert the new battery with the plus (+) and minus (-) markings matching the markings in the battery
compartment.
③ Close the battery door.