User's Manual

M600C Mobile Broadband Module

over a VPN connection are the most likely to require such a delay because your VPN

Client software may take some time to launch and log into a VPN.

5. Click OK to exit the Monitor Details window.

6. Repeat steps 1 to 5 for each additional application that you want to launch

automatically.

7. Click OK to exit the Settings window. You may now close the settings menu.

8. Open the Network Profiles window by selecting Tools > Profiles.

9. Select the profile with which you wish to launch the applications you specified earlier.

10. Click Edit. The profile editing window appears.

11. On the General tab, check the Enable application launcher box.

12. Click OK to exit the profile editing window.

13. Repeat steps 9 to 12 for each additional profile you want to use the application

launcher with.

Special Cases

Internet Explorer and VPN client software are special cases. Although you can add either

Internet Explorer or a VPN client to the list of launched applications here, it is not the

easiest or the most flexible way to launch these applications.

 Each network profile has a dedicated setting that specifies whether Internet

Explorer should be launched upon successful connection. See Edit Network

Profile: General properties for more information.

 Sprint Smart View includes a dedicated interface for configuring and launching

VPN clients. You must use this interface if you wish to take advantage of the

enhanced VPN functions provided by the Sprint Smart View software. See

Automatically launching a VPN connection for more information.

Changing the Order in Which Applications Are Launched

The order in which applications are launched is controlled by the amount of launch delay