User's Manual

M600C Mobile Broadband Module

latitude from 0 to 90 degrees. In either case, 0 is the equator and 90 is the latitude of

the polar region.

Longitude

Your current longitude, expressed in degrees and rounded to four decimal places.

Longitude 0 is at the prime meridian, which passes through Greenwich, England. Positive

numbers up to 180 indicate locations east of that location. Negative numbers to -180

indicate locations west of the prime meridian.

HEPE

Horizontal Estimated Position Error. This is a measure of the accuracy of your calculated

position. So, if the HEPE is 43 feet, you could be as much as 43 feet from the

coordinates indicated by your device’s GPS receiver.

Satellites

The number of satellites your GPS receiver has acquired. At least 3 are required to

provide latitude and longitude. At least 4 are required to provide an altitude. Additional

satellites provide greater accuracy (7 or more is considered excellent).

Last Fix

The date and time that your GPS receiver was last able to update its location data.

Altitude

Your current altitude above sea level(in feet). Note that because of the inherent

difficultly in determining altitude via GPS, the margin of error for altitude may be

somewhat larger than the HEPE (the margin of error for latitude and longitude).

Settings: Sounds

The Sounds tab allows you to configure Sprint Smart View to play a sound when various

events occur. You can also specify the sounds that Sprint Smart View plays. To enable

this feature, check the Enable sounds box. Once the feature is enabled, checking the

box for an event you wish to associate with a sound, and then click Browse to select the

sound file that you wish to play (a Windows .WAV file). You can specify sounds for the

following events:

Connected

Plays a sound when Sprint Smart View successfully connects to a Wi-Fi network.