User's Manual

M600C Mobile Broadband Module

Select this option if you want product updates to be downloaded only when you click the

Update Now button.

Settings: VPN

The VPN tab specifies how Sprint Smart View accesses Virtual Private Networks. The top

item, Do not use VPN, disables Sprint Smart View's capacity to log into VPNs. This is the

correct setting if you do not wish to establish connections to Virtual Private Networks.

You must choose one of the other three options and fill in the corresponding fields if you

wish to do either of the following things:

 Connect to a VPN by clicking the VPN icon in the main window.

 Automatically log into a VPN when you connect to a specific network (see

Automatically Launching a VPN Connection).

Use existing VPN profile

Select this option if the VPN client software you will be using is supported by Sprint

Smart View . Then, specify the supported VPN client software and the Login Profile that

you want to use.

Use third party VPN client

Select this option if the VPN client software will be using is NOT supported by Sprint

Smart View . Then, follow these steps:

1. Click Browse.

2. Select the program file to be launched.

3. Click Open. The path of the selected file should now appear in the Command line field.

4. If the VPN client software requires that additional parameters be included after the

program filename on the command line, these may be entered in the Parameters field.

Consult the documentation for your VPN Client to determine if such parameters are

needed.

Auto Launch

Check this box if you want new Network Profiles created to automatically launch the VPN

software specified above each time you connect. Note that this is only a default. You can

change this setting for an individual profile by checking or unchecking the VPN Auto