User's Manual

z Connect the devices and set up the test environment according to Figure-2. Then connect the

S600W to the PC through a Micro-USB to Type A USB cable..

z When performing the wired connection test, connect the E5515C to the RF interface of the

S600W.. (For the connection method, see Figure-2 )

z When performing the wireless connection test, connect the antennas to the RF interface of the

S600W directly. (For the connection method, see Figure-3.)

V. LED indication of the S600W

Green: H/W power indication

Blue: Indicate the state of the card.(M600W)

VI. Material List

Model Device USB Y-Cable WiMAX

antenna

S600WW 1 EA 1 EA 2 EA