Operation Manual

43
5.6 Using the Schedule
5.6.1 Adding Entries
A maximum of 100 entries can be created in the schedule.
1. In the Utilities menu, press / to select Schedule and
then press
enter
.
• Or press the letter key F in the Utilities menu for direct
selection.
2. Press the softkey NEW.
3. Enter appropriate information in the available elds.
• Press / or
enter
to move between elds.
• Certain elds allow the input of symbols and numbers,
press the softkey SYMBOL or NUMBER respectively to
do so. To input symbols, press / or / to select a
symbol and then press
enter
. To input number, press the
corresponding number keys on the keyboard. When you
have nished inputting symbols or numbers, press
esc
.
4. When done, press the softkey SAVE.
• To quit without saving, press the softkey CANCEL.
5.6.2 Viewing Entries
1. In the Utilities menu, press / to select Schedule and
then press
enter
.
• Or press the letter key F in the Utilities menu for direct
selection.
2. Press / to select an entry and then press
enter
to
view.
3. Press / to scroll through the available elds.
4. Press
esc
to exit.