User's Manual

16
Resetting Your BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addition,
resetting your BOOKMAN unit erases set-
tings and information entered into its built-
in book, and in an installed book.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
This unit may change operating modes
due to Electro-static Discharge. Normal
operation of this unit can be re-estab-
lished by pressing the reset key,
ON/OFF
,
or by removing/replacing batteries.
➤ Troubleshooting BOOKMAN
• Make sure your book card, if any,
is installed correctly.
•
Check that your book card’s metal
contacts are dirt-and dust-free.
Copyrights & Patents
Model: BJP-2034
• size: 5.9 x 4.2 x 0.2 cm
• weight: 0.4 oz.
© 1998 Franklin Electronic Publishers,
Inc., Burlington, NJ 08060-4907, USA.
All rights reserved.
FCC Notice: Complies with the limits
for a Class B computing device pursuant
to Subpart B of part 15 of FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not
cause harmful interference; and (2) This
device must accept any interference re-
ceived, including interference that may
cause undesired operation.
U.S. Patent 4,891,775
ISBN 1-56712-216-7