User Guide

Changing the Battery

This product uses one CR2032, 3-volt lithium

battery. The battery should be changed when the

screen contrast is too light even after adjustment.

Before you replace the battery, you should have

a new battery and a small Phillips screwdriver on

hand.

Warning! If the battery completely loses power,

all the information stored in the phone list will be

permanently lost. Furthermore, any time that you

change the battery, you risk losing all your phone

list information, so always keep

written

copies of

your phone list information.

1. Using a Phillips screwdriver, unscrew and

remove the back cover.

2. Install a new battery, with its plus sign (+)

facing you.

3. Replace the back cover.

✓ Disabling the Demonstration

After changing the battery, the automatic

demonstration may appear when you turn

on the unit. To stop the demonstration,

press

CLEAR

. To disable the demonstration,

type

✽✽

at the

Enter a word

screen and

then press

ENTER

ncs-101Plus-02eng_A.pm65 6/25/03, 10:47 AM18