User's Manual
Table Of Contents
- Revision
- Contents
- TAKE CARE OF SAFETY INSTRUCTIONS IMPORTANTLY
- Abbreviations
- 1， What’s Franklin Home Power (FHP)
- 2， Warranty
- 3， Product’s overview
- 4， Datasheet
- 5， System care
- 6， System information
- 7， Monitoring and management
- 8， System operation
- 9， Maintenance
- 10， Troubleshooting
- 11， What to do in an emergency case
Title
Franklin Home Power User Manual
Date
August 10, 2021
Doc. No.
FD21081001
Revision
V01
© 2021. FranklinWH Technologies Co., Ltd. Page 13 Total 31
3.2 aPower
The below shows the aPowers appearance and components and features.
Figure aPower appearance and components
Items Descriptions Remarks
1 Power converters system (PE) inside It can be replaced by maintenance required
2
Battery full pack with BMS inside
3 LED indicator Indicates the unit status
4 Wiring compartment Provides the connection ports to aGate
5 Vented grille There have 3 plates on the left, right, and top.
6 aPower on/off button Default the button off during shipping and storage. It is required
to push the button down a little as on to power on the aPower and
LED will be lighted after the aPower is installed completely until
emergency stop when maintenance or replacement.
7 Air vent outlet At the upper of the unit back
The battery pack has a heatsink and fans cooling at the unit back
The PE unit has a heatsink at the top of the unit.
8 Air vent inlet At the back bottom
9 Mounting hook
10 Legs support