User's Manual
Table Of Contents
- Revision
- Contents
- TAKE CARE OF SAFETY INSTRUCTIONS IMPORTANTLY
- Abbreviations
- 1， What’s Franklin Home Power (FHP)
- 2， Warranty
- 3， Product’s overview
- 4， Datasheet
- 5， System care
- 6， System information
- 7， Monitoring and management
- 8， System operation
- 9， Maintenance
- 10， Troubleshooting
- 11， What to do in an emergency case
Title
Franklin Home Power User Manual
Date
August 10, 2021
Doc. No.
FD21081001
Revision
V01
© 2021. FranklinWH Technologies Co., Ltd. Page 14 Total 31
3.3 aPower LED indicating
aPower has a LED indicator on the right, consists of 5 section lights. The definition is described below.
Figure Definition of LED indicating of SOC status
SOC Indicating Remarks
80%＜SOC≤100%
Section 1/2/3/4/5 on and solid from the bottom
60%＜SOC≤80%
Section 1/2/3/4 on and solid from the bottom and
last section 5 at the top is off
40%＜SOC≤60%
Section 1/2/3 on and solid from the bottom and last
section 4/5 at the top are off
20%＜SOC≤40%
Section 1/2 on and solid from the bottom and last
section 3/4/5 at the top are off
0%＜SOC≤20%
Section 1 on and solid from the bottom and last
section 2/3/4/5 at the top are off
Table LED indicating of aPower work status
Works Indicating Remarks
Power On The LED indicator is flashing from top to bottom
and keep section light one by one, total duration of
4 seconds flashing, and then enter the SOC status
Charging Sections of SOC are on and solid, and the charging
section is flash on/off with a cycle of 4 seconds.
With communication
Discharge and Ready status Sections of SOC is on and solid With communication
Energy empty/remote
off/fault
All LED sections off With communication