User's Manual
Table Of Contents
- Revision
- Contents
- TAKE CARE OF SAFETY INSTRUCTIONS IMPORTANTLY
- Abbreviations
- 1， What’s Franklin Home Power (FHP)
- 2， Warranty
- 3， Product’s overview
- 4， Datasheet
- 5， System care
- 6， System information
- 7， Monitoring and management
- 8， System operation
- 9， Maintenance
- 10， Troubleshooting
- 11， What to do in an emergency case
Title
Franklin Home Power User Manual
Date
August 10, 2021
Doc. No.
FD21081001
Revision
V01
© 2021. FranklinWH Technologies Co., Ltd. Page 7 Total 31
electric 240VAC voltage operation.
Danger! FHP is heavy. Recommended using lift moving the units.
Danger! Do not use FHP if it is cracked, defective, broken, and others damaged or fail to operate.
Danger! Check and ensure the aPower on/off button is off (button push down little and no LED light on before unit
installation and wiring installation. Ensure circuit breakers in or to aGate are switched off before unit installation and
wiring installation.
Danger! Do not attempt to disassemble, open, repair, modify or replace FHP. FHP and its components are not
user-serviceable. Batteries in the packed case are not replaceable. Call the unit installer trained and authorized personal
who installed your units for any repairs.
Danger! Do not impact, pull drag, or step on the unit aPower, aGate, packed materials to protect FHP from damage
when transporting. Do not subject any strong force to FHP. Keep the product units into the package upward until they
have arrived at the installation site.
Danger! Do not insert any objects into FHP and rotated fans in the back. Do not block any, such as the case top,
bottom, left side, right side. Keep the unit vented and no any blocks around.
Danger! Do not expose FHP to direct fire, flame, or heat sources, etc.
Danger! Do not immerse FHP in water or other fluids.
Danger! Ensure the installation height prevents water ingress otherwise there will be a risk of electric shock while
the flooding possible.
Danger! Ensure the FHP storage and operating environment is not out of the range specified otherwise it will cause
the FHP damage! Do not expose the FHP to ambient over 50degC (122degF) or less -20degC (-4degF).
Danger! Keep FHP works well and do not stop it when you leaving the house for a long time. Do not push aPower
on/off button off. Do not disconnect the power supply from solar input and grid input to unit aGate and aPower
connection well. It is not warranted!
Danger! Please do not abuse the products with huge loads when the grid-off. It is not warranted!
Danger! Ensure use carbon dioxide fire extinguisher or aerosol extinguisher, etc. to put out the fire.