Installation Guide

V1 9/2018

Animated Figurine Assembly Instructions

The model number of your figurine is printed on the side of your carton.

Always use this number to identify your model.

Thank you for your purchase of this quality holiday decoration. With proper use and care, your figurine will

provide you with years of enjoyment. Please follow the instructions on how to assemble and disassemble.

If you should have any problem with your decoration, DO NOT return it to the place of purchase. Please call

our toll free number below and a customer service representative will assist you. Enjoy your holiday!

Customer Service: 1-855-591-7451 (9am to 5pm, Monday through Friday)

This product is for indoor use only. Do not place in direct sunlight.

This product operates with 5V isolating transformer. Only use with the 5V transformer supplied.

Please read all instructions completely before assembling your figurine.

Assembling the figurine:

Your Package Includes:

Two-piece Figurine & 1 Transformer

1. Remove all parts from packaging carefully. Use

caution with sharp tools.

2. Stand figurine body upright on sturdy surface.

3. Turn the white cap on the neck counterclockwise to

release the legs from under the body cavity. Keep a

firm grip on the shoulders to prevent the body from

releasing quickly.

4. Hold the neck area steady and pull body up

so the legs expand from the cavity section.

PAGE 1
V1 9/2018 Animated Figurine Assembly Instructions The model number of your figurine is printed on the side of your carton. Always use this number to identify your model. Thank you for your purchase of this quality holiday decoration. With proper use and care, your figurine will provide you with years of enjoyment. Please follow the instructions on how to assemble and disassemble. If you should have any problem with your decoration, DO NOT return it to the place of purchase.
PAGE 2
V1 9/2018 5. Insert the white prong on the bottom of the head into the neck and press it down in place until you hear a click. 6. Make sure that the position of the head is the same as the body. Attaching the Transformer: 1. Insert the jack into the white base. 2. Straighten out the clothes and fluff up any accessories. 3. Insert the transformer into the power socket. NOTE: The figurine will begin movement when the sensor detects someone is more than 20 inches away. Warnings 1.