Bento 10D Module Carrier Operating Manual
Fredenstein Bento 10D Module Carrier The Fredenstein Bento 10D is a high performance module carrier for Fredenstein Series 600 modules or API-500 compatible plug-in cards in 3U 19 inch rack format. The unit accepts a maximum of 10 modules. The Bento 10D features several important upgrades compared with third party products: A LCD Display and a rotary encoder: To set routing and other parameters with non-volatile storage.
Fredenstein Bento 10D Module Carrier Operation: After installation of the modules, connect the mains cord to the Bento 10D IEC socket located on the back-panel and than connect the mains cable to a grounded outlet. Now turn the Bento 10 on by operating the I/O switch (also part of the IEC socket on the back). The following screen will be displayed indicating the status and power-supply voltages. Now the Bento 10D is ready and will display any request from certain Fredenstein modules.
Fredenstein Bento 10D Module Carrier The Compressor Buss menu defines the links between the Pin 6 of the slot connectors. This is a standard feature and is widely supported by many 500 series module manufactures. But different manufactures and even different models from the same manufacturer can have different signals on the compressor buss. To avoid malfunctions and potential damages to modules, the compressor buss can be split into multiple segments or completely turned off.
Fredenstein Bento 10D Module Carrier To recall stored select Memory and push the wheel and the number of the setup is highlighted, turn the wheel to the number you want to use, then press the wheel to recall this configuration. Selecting Exit and pushing the wheel will show the Setup Menu again. In case of severe ground loops you might engage the ground-lift to alleviate such problems.
Fredenstein Bento 10D Module Carrier Rear View: Specifications: Input Voltage: Output Voltages: 90V AC to 240V AC, 50 to 60 Hz +16V DC 3.2A -16V DC 3.2A +48V DC 0.3A Power Consumption: max. 150W Dimension (LxHxD): 480mm x 140mm x 190mm Weight: 4.5kg(NW) ; 6.
Fredenstein Bento 10D Module Carrier Pin 11 AUX In + Pin 12 +16V Supply Pin 13 Supply Ground Pin 14 -16V Supply Pin 15 +48V Supply Component Side Pin 1 Frame Ground Pin 2 Main Out + Pin 3 Digital Interconnect 1 Pin 4 Main Out - Pin 5 Audio Ground Pin 6 Compressor Buss Pin 7 Digital Interconnect 2 Pin 8 Main In - Pin 9 Digital Interconnect 3 Pin 10 Main In + Pin 11 Digital Interconnect 4 Pin 12 +16V Supply Pin 13 Supply Ground Pin 14 -16V Supply Pin 15 +48V Supply Fred
Contact Info: Fredenstein Professional Audio by Orion Communication 7F-1, No. 582, Ruei Guang Rd. Neihu District Taipei 114 Taiwan Phone : Email : Web : + 886-2-2657-2618 info@fredenstein.com www.fredenstein.