User Manual

Fredenstein F606 Balancer
Installation:
Please power down your rack or box first before inserting the F606. The power requirements are
+/-16V, +/-100mA. Please be aware, the F606 will not work in any third party enclosures.
The channel 1 balanced output signal is fed to MAIN output XLR located on the back panel of the
Fredenstein Bento rack. The channel 2 output signal is fed to the AUX output XLR.
Gain:
Gain control from + 6 dB to + 26 dB.
CH1 POL:
Flips the polarity of the channel 1 signal.
CH2 POL:
Flips the polarity of the channel 2 signal.
Technical Data:
Frequency Response : 10 Hz – 30,000 Hz, +/- 0.5dB
Distortion : < 0.01%
SNR : < -100 dB
Input Impedance : 100 KOhms
Max. Input Level : +18 dBu
Output Impedance : 50 Ohms
Max. Output Level : + 24 dBu
Fredenstein F606 Manual V1.1 July 18, 2014 Page 2