User's Manual

Fredenstein F610 Universal Entzerrer UE-1
RST: Only available, if MAX is active, RST resets the maximum curve.
DCY: Only available, if MAX is active. By repetitively touching DCY, four decay modes
for the maximum curve can by selected. DCY 0, disables decay until the user
touches RST, useful for determining maximum levels over the duration of a
song/take. DCY 1 to DCY 3 offer three different time constants for the decay
with DCY 3 being the fastest.
L: Displays only the green left channel curve, the MAX function will also only be fed
by the left channel. This is independent of the channel setting in the equalizer screen.
R: Displays only the red right channel curve, the MAX function will also only be fed by
the right channel. This is independent of the channel setting in the equalizer screen.
L&R: Displays both the left and right channels , the MAX function will also be fed by both
channels. This is independent of the channel setting in the equalizer screen.
RNG: By repetitively touching RNG, four display ranges can the selected from +6db to
+24dB in 6 dB steps depending on your program level.
On/Off: Toggles the hard bypass functionality. If ON is displayed inside the touch field, the
corresponding channel activated, if OFF is displayed, the hard bypass mode is
selected. This is dependent on the channel setting in the equalizer screen.
.
After touching the graph area on the Analyzer Screen, the Equalizer Screen is displayed:
Fredenstein F610 Manual V1.0 Nov 17, 2017 Page 8