Owner's manual

After the currents settled, the unit is fully operational and the user will be forwarded to the main
menu.
The Main Menu allows to modify the following parameters:
Compressor Gain:
The gain of the compressor without gain reduction can be adjusted in 0.5dB steps in the range of
-11db and +11 dB. To adjust the gain move the cursor with the rotary control to the gain field and
then press the rotary control.
The cursor will move from the left to the right and the rotary control becomes the level “pot”. The
change is applied immediately, therefore the engineer can hear the changes right away. When
Fredenstein F660 Manual Release 2.1 July 18, 2014 Page 3