Owner manual

Fredenstein V.A.S. Compressor
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
If you need to replace the mains fuse, make sure the replacement has the same
rating (0.5AT 250V).
Rear View:
Please connect your audio inputs and outputs first to the XLR or TRS connectors
located on the back panel. If you own two V.A.S. Comps, please insert a standard
TRS cable into link connectors on both units. Connect the mains cable to the V.A.S.
Comp and then to a grounded mains outlet. The power ON/OFF switch is located on
the back panel near the power cable connector (IEC). After the unit is powered on,
the PWR indicator on the front panel will be illuminated.
Fredenstein V.A.S Comp Manual V1.1 Oct. 2, 2014 Page 2