User Manual

Rev: 29 April 2005
2.6 Read and write settings
When changes have been made in the configuring software it is necessary to store the new settings in the
plug. Pressing the “Write configuration” button in the lower right corner of the screen does this.
The settings are stored in persistent memory and are
therefore not lost when the power is removed from the plug.
When saving new setting, the previous settings will be
lost. If unsure, save a copy of the default configuration
before changes are made (See section 2.7).
It is also possible to choose “Write to device” via the “Configuration” option of the pull down menu.
By clicking the “Read configuration” button or the “Read from
device” menu option, you are enabled to upload the plugs
current settings to the configuration program. This occurs
automatically every time you start up a session with the plug.
When reading settings from the F2M01 eventually changed
parameters in the Configuration Software will be overwritten.
2.7 Load and save settings to file
In the file menu you are presented with two options for either saving
or loading settings.
The “Load settings” option allows you to load configuration setting
from a pre-existing file on the computer into the Free2move
Configuration Software.
The “Save setting” option allows you to save the current
configuration settings in the Configuration software to a file on your
computer.
This option can be useful if you wish to apply similar settings to a
number of serial port plugs. It can also be used for support matters.
Before contacting Free2move’s or resellers support department, please save your configuration to file and
attach this file in the email describing your problem.
Page 14(28)