User Manual

Rev: 29 April 2005
3.1 User defined baud rate
When the advanced settings are enabled in the configuration software, a new function appears on the
Serial port tab. This function is used to define a baud rate that are not one of the standard ones found in the
Baud rate drop-down list. The user defined baud rate can be used in the serial port plugs with software
version 3.0 or higher.
To use a non-standard baud rate, check the "Use non standard baudrate" checkbox and enter a value in
the "Value" field. The calculated baud rate is shown in the application when values are entered. It is
possible to set baud rates from 244 baud up to the maximum rated speed for the UART hardware of the
serial port plug, 115200bps.
To disable the use of user-defined baud rate, choose a standard baud rate in the list or uncheck the "User
define baud rate" checkbox.
Page 16(28)