User Manual

Rev: 29 April 2005
2.3 Connection management
With the plug connected to the serial port of your PC and the configuration software running you can
configure the plug to work in different situations and also to meet varying requirements for security. All
settings related to configuring a device to accept connections (Bluetooth slave mode) are found under the
Endpoint settings tab, whilst settings for configuring a device to connect other devices (Bluetooth master
mode) are found under the Connecting settings tab.
2.4 Endpoint settings
Endpoint mode is used to configure the F2M01 as Bluetooth slave. This mode will only accept connections
from other units. When configured in endpoint mode the plug can be detected by other Bluetooth equipped
units and connected by units supporting the Serial Port Profile.
Three different levels of security make it possible to configure
the plug to fit your demands for secure communication.
1. No authentication
2. Require passkey
3. Require paired device
You can choose between the three options in the Device mode
settings frame.
When configured to require passkey or paired device, encryption can be used to ensure secure
communication.
Page 8(28)