User's Manual

Acquire the front and rear stabilizer (part B and C). Part B stabilizer

(with wheels) goes in the front of the bike, while part C stabilizer

(without wheels) ﬁts at the rear of the bike.

Place the main frame (part A) on top of the stabilizers.

Fix the main frame in place by fastening part J1 into the side of the

front stabilizer, and part J2 into the top of the front stabilizer.

Then fasten the remaining J1 screws into the side of the rear

stabilizer, and remaining J2 screws into the top of the rear stabilizer.

* Use foam from the packaging to give extra support to hold the bike upright, if needed.

* It's suggested to attach the front stabilizer ﬁrst, then attach the rear stabilizer.

STEP 1

6mm