User's Manual

STEP 5
Attach the touchscreen (part E) to the
square panel. Using a phillips head
screwdriver and four phillips countersunk
head screws (part J5), secure the
touchscreen (part E) to the monitor arm.
Plug the monitor cable into the back of
the touchscreen.
Connect the power adapter (part I) to an
electricity outlet and turn on the monitor.
Before you start riding, make sure the bike
is stable by leveling the feet underneath
the front and back stabilizers.
Turn them counterclockwise until they rest
firmly and are stable on the ground. Use
either your hands or a wench to level the feet.
Tighten any loose screws if the bike is still
unstable. Ensure the bike does not wobble.
Finally, log in to your freebeat account, pick
a class and start pedaling!
GETTING
STARTED
STEP 1
CONNECT TO WIFI
Search and select your preferred
WiFi network
If the network is secured, you will
be prompted to enter a
password. Enter the password
and tap "Connect".
If the network is not secured, the
bike will connect to the network.
*
*
E
J5
I