User's Manual

STEP 8
Attach the square panel from the back of the touchscreen. Using a Phillips head screwdriver and four Phillips Countersunk Head Screw (part L4), secure the touchscreen (part F) to the monitor arm. Plug the monitor cable into the back of the touchscreen. Connect the Power Adapter (part K) to an electricity outlet and turn on the monitor.
Before you start riding, make sure the bike is stable by adjusting the leveling feet underneath the front and back stabilizers. Turn them counterclockwise until they rest ˡȸȅǼɵȒȇɎǝƺǕȸȒɖȇƳand ensure stability on the ground. Use either hand or wench to turn the leveling feet. Tighten any loose screws if the bike is still unstable. Ensure the bike does not wobble. Finally, login to your freebeat account, pick a class and start pedaling!
F
L4
K
WA R N I N G
L7
GETTING STARTED
STEP 1 CONNECT TO WIFI Select and tap the WiFi network name
If the network is secured, you will be prompted to enter a password. Type in the password and tap Connect If the network is not secured, the bike will connect to the network
* *