User's Manual

Place the main frame above the stabilizers, aȇƳˡɴthe main

frame (part A) into place by tightening parts Hex bolt into

the corresponding Spring Washers and Curved Gasket (part

L1) on the stabilizer.

*Place all parts G1 into stabilizers before tightening the main

frame and stabilizers together.

Acquire part B and part C front and rear stabilizer. Part B

stabilizer with wheelɀˡts in the rear of the bike, while part C

stabilizer without wheelɀˡts at the front of the bike.

*Use foam from the packaging to give extra support to hold

bike upright, if needed.

STEP 1

SCAN HERE TO VIEW

THE COMPLETE VIDEO

OF STEP-BY-STEP

GUIDE FOR ASSEMBLY

17mm