User's Manual
Screw part G Water Bottle Holder into
part D Handlebar Riser with Phillips
Pan Head Screws (part L2).
STEP 2
Carefully attach part D Handlebar
Riser with main bike frame and
connect Computer Upper Cable with
Computer Lower Cable (removed the
black string).
STEP 3
Once the cables are connected and Handle
Riser (part D) is attached to the main frame
(part٣ًˡȇƳpart H Weight Selector Pin and
insert into the screwhole and adjust the riser
tube to a suitable height.
* If the data chord is unsteady: part H Weight
Selector Pin and part D Handlebar Riser in
the front end of the main frame needs to be
unscrewed and readjusted and tightened
again.
STEP 4
D
G
L2
H
D
A
4mm
E
D
STEP 5
Fit the handlebar post (part D), onto the
handlebars (part E), push the handlebars from
behind in place. Add two Hexagon Socket Head
Bolt (part L3) and bolt them to the front of the
handlebar post. Screw them in with a 4mm
Allen wrench. Make sure the screws are fully
tightened and secured.
*Suggest to use short side of 4mm Allen wrench,
and use long side as the bolts are tighter.
D
A
L3
L8
L7