Computer Drive User Manual

Freecom FHD-3

3.2 FHD-3 USB 2.0 & FireWire version

Driver installation USB under Windows 98 SE

Connect the FHD-3 to the computer only on the USB

or FireWire

interface.

Note: Your Freecom FHD-3 is fully backwards compatible with USB

1.1. The installation for USB 1.1 is the same as described below for

USB 2.0.

1. Insert the Freecom Manual and driver CD into the CD-ROM drive.

2. Connect your Freecom FHD-3 to the USB connector of your notebook or

computer.

3. The "Add New Hardware Wizard" opens and a "USB 2.0 Device" (USB 2.0 PCI

Host Controller) or a "USB2-IDE Controller" (USB 1.1 connector) is found.

Click on "Next".