Operation Manual
25
English - 3
Every day use
The red LED blinks and the REC PAUSE
message appears in the display.
Press the RECORD button again to continue
voice recording.
To finish the voice recording, press the PLAY
[4] button.
The file number and the information for the
recorded file are displayed.
To play the recorded voice file, Press the
PLAY [4] button after selecting the recorded
file.
Playback of a voice recorded file works the same as playback of a music file.
Please refer to the Playback mode section of this manual.
VAD (Voice Activity Detection) Recording
VAD is a function whereby Voice Recording
only starts when a voice is detected. The
recording pauses when no voice is detected.
This method saves memory-usage by
optimizing the file size of voice recording.
To select VAD mode, press the MENU key while player is in stop/pause mode,
and scroll through the menu until VAD OFF appears in the display.
Slide the FF [8] or REW [7] Jog key up and down to select the VAD mode
you want. Press the EQ/RPT button to store this mode.
Tip> VAD OFF : The normal recording mode which also records a muted
section VAD ON : The memory saving recording mode which only records
when voice is detected.
Voice recording quality (bit-rate)
You can adjust the bit-rate of the voice recording file. A high bit-rate means
a high-quality sound but also a large file size. A low bit-rate means a lower
sound quality but a smaller file size.