Operation Manual
27
English - 3
Every day use
SYNC ON: Records all files transferred from external
equipment in separate files. This function detects
periods of silence in between tracks.
1 SYNC: Records only the first file transferred from
external equipment and stops automatically when
silence is detected
Setting up the Silence Detection Level
When using the SYNC mode for Line-in re-
cording, you can select the silence detection
level between the tracks you want to record.
To setup the silence detection level
To setup the silence detection level, press the MENU key while the player is
in stop/pause mode, and scroll through the menu until SILENCE (L) MID
appears in the display.
Slide the FF [8] or REW [7] Jog key up and down to select the detection level
you want. Press the EQ/RPT button to setup this detection level.
The line in detection levels are as follows;
SILENCE (L) HIGHHigh detection level: Select this when silence levels
between the tracks are low or the sound source is not loud.
SILENCE (L) MIDMedium detection level. Generally this should
be sufficient in most cases.
SILENCE (L) LOW Low detection level: Select this when silence
levels between tracks are high or the sound source is loud.
Caution> If the sound source level is too low, the recording may not
be available.