Operation Manual

34
English - 3
Memory Information
To check memory information,
press the MENU key in the Stop mode to select the MEMORY:000.0/000.0M
FILES:000. The remaining memory information is displayed as a scrolling
format.
Tip> i.e., if it indicates MEMORY : 100.0M/128.0M FILES:031, the total
memory is 128MB, 100M is free to use and 31 files are saved.
3.7 Firmware upgrade
1. Connect the Beatman Flash Recorder to the PC using the USB cable.
2. Run the MP3 Manager program, installed on your PC.
3. Check if memory info is displayed on the LCD of the Player (below the
line USB ONLine) and in MP3 Manager software. If no problem is
found, proceed to the next step.
4. Click the right button of the mouse in the PLAYER FILE LIST window
(located on the bottom right of the MP3 Manager window); a pop-up
window will appear. Click on F/W Upgrade to proceed.
5. Browse to the location on your harddrive where you have saved the
firmware file that was released by Freecom, and click the open button.
FIRMWARE UPGRADE process will start.
If you want to cancel the firmware upgrade, click the cancel button.
6. When the Firmware upgrade is completed, the FIRMWARE UPGRADE
window will close automatically.
7. Remove the USB cable, turn off the power of the player and turn the
power back on.