Operation Manual

8
English - 1
CHAPTER 1: Start up - Hardware Installation
For correct use of the Beatman Flash Recorder, please make sure you follow
the below mentioned steps in this order:
1. Install MP3 Manager software from the supplied Manual & Software CD.
For more information on the installing process, refer to Installing the
PC Software in this manual.
2. Install the USB driver (included on CD). This is done automatically during
the MP3 Manager software installation
3. Insert the battery.
4. Connect the USB connection cable between the USB ports of the Player
and your PC.
- When the USB driver is correctly installed, the USB ON-Line message
will be displayed on the LCD screen. -
5. Download MP3 and WMA music-files to the Player using the MP3
MANAGER software.
6. Disconnect the USB cable from the Player
7. Connect the earphone/remote control to the Player
8. Slide the switch of the Mode Selection button to MUSIC (MP3, WMA
playback) or FM (FM radio playback)
8. Press the PLAY button in the center (the Jog key on the right-hand side
of the player) to turn the power on.
9. Enjoy the music!