User Guide

ValueLoader Administration
Updating Firmware
44 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
To access this option, follow these steps:
1 From the Home screen or main menu, press the [+] or [–] button
until “Configuration” appears on the top line of the LCD
screen.
2 Press the [Enter] button to select.
3 Press the [+] or [–] button until “Autoload Mode” appears on
the screen. The second line on the LCD screen displays the
current status, either “On” or “Off.”
4 Press the [Enter] button. The LCD screen indicates whether you
are about to turn Autoload Mode on or off.
5 Press the [Enter] button to accept the change to Autoload mode
or press
[Cancel] to exit and not save the changes.
Updating Firmware 3
Using a Firmware
Upgrade Tape
3
This option performs a firmware update for the ValueLoader using
a firmware upgrade cartridge.
Caution: Regardless of the firmware update technique, DO
NOT POWER CYCLE OR RESET THE
AUTOLOADER DURING THE UPGRADE
PROCESS. Doing so could cause the ValueLoader to
become inoperable.
Note: This code update operation assumes that the upgrade
tape is imported as part of this procedure. Do not import
the firmware update cartridge before starting this
procedure.