Installation Instructions

ManualsBrandsFreedconn ManualsAudio EquipmentBluetooth headset

Shenzhen Freedconn（FDC） Electronics Co., Ltd

Bluetooth headset KY PRO

Freedconn

一、

Introduction

Thank you for choosing FreedConn KY PRO Motorcycle Bluetooth Communication System.

T-Rex is a Full Duplex Group Talk Bluetooth System, applying humanized design, integrating the cutting edge

technology of all similar products and becoming a perfect motorcycle communication system. It can satisfy all

kinds of needs in your journey, such as wireless dialling, receiving calls, listening to Mp3 music, receiving GPS

voice prompt and connecting with handheld interphone. The most important is that it can realize group talk among

motorcycles, providing you convenient communication with your teammates throughout the ride.

二、 Main Functions

1.6

-way 1000m conference talkback

Multiple device connected simultaneously

Wired/wireless connection with handheld interphone

Built-in radio

Voice prompt

Usable during recharging

三、

Functions and Operation of Buttons

1.On/Off button and talkback button

2.Multi-functional button

3.Recharging port

4.headphone jack

5.LED indicator light

四、

Pack Content

Bluetooth device 2.Universal clamp

USB cable 4.Microphone& speaker

Headphone VELCRO 6.Handheld interphone control cable

PTT VELCRO tape 8.Manual

五、Installation Procedure

1. Loosen the screws on the back of clamp with the provided screw driver.

2. Open the lining of helmet,insret the clamp in the proper pasition on the left of helmet and fasten the screw (overly

fastened screw can damage the clamp)

Summary of content (5 pages)

PAGE 1
Shenzhen Freedconn（FDC） Electronics Co., Ltd Bluetooth headset KY PRO Freedconn 一、 Introduction Thank you for choosing FreedConn KY PRO Motorcycle Bluetooth Communication System. T-Rex is a Full Duplex Group Talk Bluetooth System, applying humanized design, integrating the cutting edge technology of all similar products and becoming a perfect motorcycle communication system.
PAGE 2
3.Slide the receiver down into the slots on the headset clamp mount.Make sure that it is locked in securely. 4. open the lining of helmet (at ear's position), clean the EPS surface adn affix the Velcro on with the rough surface. 5. Affix the hook surface of speaker to the rough surface of VELCRO and properly tidy the helmet lining. 6. Insert the headphone plug into the corresponding headphone jack on the receiver to finish the installation. 六、 Functions and Operation of Buttons 1.
PAGE 3
1. Pair with Mobile Phone, Mp3 and GPS Step 1: Ensure KY PRO is off and within 1 m visible range of the device to be paired. Step 2: Press down the T-Rex On/Off/Talkback button for 8 seconds until you hear "Pairing" prompt, when the red light and blue light flash alternatively, T-Rex enters pairing status. Step 3: Start the Bluetooth device to be paired, search and choose T-Rex to pair. When you hear "Your phone is connected" prompt and the blue light flashes regularly, pairing is successful. 2.
PAGE 4
十二、 Technical Parameters of Product Frequency：2.4GHZ Weight：38g Size：90 x 40x 26.5mm Battery volume：500mAh Standby time: 1 week Continuous working time: 11 h of mobile phone talk 9.5 h of Bluetooth talkback Recharging time：1 h or so Power adaptor: DC5V1000mA 十三、 Indication of Battery Volume Polymer Batteries are used in this product, so please put it in dry places. Recharge the battery after more than 1 month of storage to achieve the service life of product. 1.
PAGE 5
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.