Use Instructions

RUBY 10 Setup and Use 2
Charge and Power On Device
1. Attach a USB-C cable to the left side of the device and to the power adapter.
2. Plug the power adapter into a wall outlet. A full charge takes about 4 hours.
3. Press the orange button above the USB-C port for 3 seconds to power on the
RUBY 10. The Freedom Scientific and RUBY 10 splash screens are displayed
before going to live view.
4. Briefly press the Power button for sleep mode and to display the battery status.
Press the Power button for 7 sec to power off the device.