Plastic Lattice LATTICEBOM V1 2/13 Owner's Manual Installation Instructions PLEASE READ OWNER'S MANUAL COMPLETELY BEFORE INSTALLING YOUR LATTICE. To register your product, please visit: www.barretteoutdoorliving.com/product-registration Version 1.
Thank you for choosing the Barrette Outdoor Living Lattice. Please read the instructions completely before assembling your Lattice. Retain manual and your dated sales slip for future reference and warranty claims. Before You Begin… 2 person installation recommended It is the responsibility of the installer to meet and/or exceed all code and safety requirements, and to obtain all required building permits.
Installing With Cap & Divider Mouldings: 2 1/4" (6,35 mm) Wood 4 Along the sides and bottom, drill holes and put screws through moulding only. Allow a 1/4" gap on all sides for expansion with cap and divider mouldings. 1/4" (6,35 mm) 3 1/4" (6,35 mm) Lattice Moulding Along the top, drill and fasten every 24". Drill holes and hang through both moulding and panel.
Transferable Limited Lifetime Warranty What is covered: Barrette Outdoor Living warrants vinyl and aluminum products to include; vinyl and aluminum fence, vinyl and aluminum railing and plastic lattice against defects or workmanship for as long as you own your home. Barrette Outdoor Living will at its option replace the product in question with new product of the same or equivalent value at no charge.
