FREEDOM-WEB Plastic Lattice INSTALLATION INSTRUCTIONS Read all instructions prior to installing product. Refer to manufacturers safety instructions when operating any tools. To register your product, please visit: freedomproduct.
WARNING: • Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling and assembling the product. • Incorrect installation may cause harm to the product or individual. • Not for horizontal installations. NOTICE: • DO NOT attempt to assemble the kit if parts are missing or damaged. • DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
INSTALLING WITHOUT MOULDINGS: 1 Pre-drill oversized holes through lattice (drill the largest hole that screw head will allow without fitting though) (Fig. 1). Center each screw in oversized holes and do not overtighten to allow for expansion and contraction of lattice (Fig. 2). Fig. 1 Lattice Wood Fig. 2 2 Hang the lattice with a screw every 24". Attach sides and bottom loosely. DO NOT tighten all the way (Fig. 3). Fig. 3 3 If using more than one panel, do not butt panels together (Fig. 4). Fig.
INSTALLING WITH CAP & DIVIDER MOULDINGS: 1 Pre-drill oversized holes through lattice and moulding (drill the largest hole that screw head will allow without fitting though) (Fig. 1). Center each screw in oversized holes and do not overtighten to allow for expansion and contraction of lattice (Fig. 2). Fig. 1 Molding Lattice Wood Fig. 2 Along the top, drill and fasten every 24". Drill holes and hang through both moulding and panel (Fig. 3).
IMPORTANT THINGS TO REMEMBER: • If the lattice bows, loosen attaching screws, make sure you have allowed enough gap for expansion and contraction. • Place screws 24" apart. 24" • DO NOT use for horizontal Installation.
BARRETTE OUTDOOR LIVING 7830 FREEWAY CIRCLE MIDDLEBURG HEIGHTS, OHIO 44130 TEL: (888) 418-4400 WWW.FREEDOM.BARRETTEOUTDOORLIVING.