Installation Guide

3
STRAIGHT RAIL INSTALLATION
Closely follow post installation instructions.
*
Make sure base trim is installed
Template
1
1
2
2
Install brackets
a. With base trim installed on bottom of post, unroll
a. With base trim installed on bottom of post, unroll
paper install template and tape to post, ensuring
the bottom of the template rests on the top of the
the bottom of the template rests on the top of the
base trim. Predrill through all marked locations on
installation template "L" (not "A") into aluminum post
installation template "L" (not "A") into aluminum post
with a
9
⁄
64
" drill bit. Do this for all marked locations
" drill bit. Do this for all marked locations
for both top and bottom brackets.
b. Screw bottom brackets into post using #8x1
1
⁄
2
⁄2⁄
" Pan
2" Pan 2
Head screws (2 per bracket).
c. Screw top brackets into post using #8x1
1
⁄
2
⁄2⁄
" Pan Head
" Pan Head
2" Pan Head 2
screws (4 per bracket).