Installation Guide

6
STRAIGHT RAIL WITH VINYL TOPPER AND POST INSTALLATION
STRAIGHT RAIL WITH VINYL TOPPER AND POST INSTALLATION
Install brackets
a. With base trim installed on bottom of vinyl post,
unroll paper install template and tape to post,
ensuring the bottom of the template rests on the
top of the base trim as specifi ed. Predrill through all
marked locations on installation template "L" (not
"A") into vinyl post with a
9
⁄
64
" drill bit. Do this for all
marked locations for both top and bottom brackets.
b. Screw bottom brackets into post using #8x1
1
⁄
2
" Pan
Head screws (2 per bracket).
c. Screw top brackets into post using #8x1
1
⁄
2
" Pan Head
screws (4 per bracket).
*
Make sure base trim is installed
Template
Closely follow post installation instructions for vinyl posts.
1
1
2
2