Installation Guide

5
5
6
7
Fig. 7
Fig. 8
Check to ensure the second post is level, then add panel
width plus one half (
1
⁄
1
⁄
1
2
⁄2⁄
) the width of your post. This will
locate the center of your next hole. Then dig the third post
hole accordingly (Fig. 7).
Repeat process from steps 2 to 5 until all fence panels and
posts have been installed.
Apply glue on inside rim of post tops then attach to posts
(Fig. 8).
Center-to-Center
Post Distance