Installation Guide

ManualsBrandsFreedom ManualsOutdoor Showers73040906

INSTALLATION INSTRUCTIONS

Shower Stall Kit

Read all instructions prior to installing product.

Refer to manufacturers safety instructions when operating any tools.

To register your product, please visit:

freedomproduct.com

FREEDOM-WEB

Summary of content (6 pages)

PAGE 1
FREEDOM-WEB Shower Stall Kit INSTALLATION INSTRUCTIONS Read all instructions prior to installing product. Refer to manufacturers safety instructions when operating any tools. To register your product, please visit: freedomproduct.
PAGE 2
WARNING: • Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling and assembling the product. • Incorrect installation may cause harm to the product or individual. NOTICE: • DO NOT attempt to assemble the kit if parts are missing or damaged. • DO NOT return the product to the store. For assistance or replacement parts call: 1-800-336-2383. BEFORE YOU BEGIN: TOOLS/MATERIALS NEEDED: Check your local zoning laws.
PAGE 3
1 Measure and Mark Post Layout Measure, mark and "square" posts according to dimensions. Use "Corner to Corner Diagonal" dimension as a reference to ensure that posts are squared (Fig. 1). 42-1/4" 42-1/4" 2 Fig. 1 Corner to Corner Diagonal: Roughly 60" 42-1/4" 42-1/4" Post Installation a. Dig a 3 foot deep by 10 inch diameter hole for each post footing (Fig. 2). Use a post hole digger or an auger. Fig. 2 Ground Concrete b.
PAGE 4
3 Wall Panel Installation Fig. 4 Bottom Rail a. Slide brackets onto bottom rail and lift into place between posts (Fig. 4). b. Offset bottom brackets 10" above finish grade and center bottom rail on posts (Fig. 4). c. Mount brackets to posts using included 4 screws per bracket. Insert white screw head caps to hide screws. 10" Vertical Tongue and Groove Boards Fig. 5 a. Insert vertical tongue and groove boards into bottom rail from left to right. U-Channel b.
PAGE 5
4 Curtain Rod Installation Fig. 7 a. Attach end caps to ends of curtain rods. Use glue to create a stronger bond. b. Place curtain rods on interior side of posts (Fig. 7). Mount curtain rods to posts using included (2) 1" pan head screws per rod. Insert white caps to hide screws. 5 Post Tops Installation Place post tops on top of posts. Use glue or post top clips to create a stronger bond (Fig. 7).
PAGE 6
BARRETTE OUTDOOR LIVING 7830 FREEWAY CIRCLE MIDDLEBURG HEIGHTS, OHIO 44130 TEL: (888) 418-4400 WWW.FREEDOMPRODUCT.