Installation Guide

If transitioning to a half-privacy panel from the full privacy panel (Fig 1), use the 36"
transition cover provided in post kit to conceal top of Line or Corner post.
The transition cover is installed by snapping or sliding from the top of the post and sliding
down into place (Fig. 2).
Transition cover will need to be cut back 6" if half-privacy panel is installed at 42". Cover
works as is for 36" high rail.
Transitioning from Full Privacy to Half Privacy Panel
Fig. 1 Fig. 2
72
5
⁄
5
⁄
5
8
⁄8⁄
"
42
3
⁄
3
⁄
3
8
⁄8⁄
"
Transition Cover
Assemble post base trim over plate. Take one side
of trim ring and push plastic plugs through hole
underneath. Take second half of the trim ring and
push together (Fig. 20). Slide over plate for a
 nished look.
Fig. 20
16
1
BARRETTE OUTDOOR LIVING
7830 FREEWAY CIRCLE
MIDDLEBURG HEIGHTS, OHIO 44130
TEL: [phone]
WWW.FREEDOMPRODUCT.COM