Installation Guide

Care & Maintenance
1. To maintain the appearance of your decking, sweep periodically and clean
spills with soap and water.
2. The use of pressure washers is not recommended unless using for low
pressure (1500 psi or less with fan tip) wetting and rinsing. High pressure
washing may damage the surface of the decking. Always test all cleaning
products on an inconspicuous area before using on the entire deck surface.
3. The appearance of minor surface scratches or scuffs should diminish
after a few months of exposure to the weather and elements. For larger
scratches or scuffs, a heat gun (available at most building product or
hardware stores) may be used to carefully heat and blend the blemished
portion of the polypropylene cap material into the adjacent deck surface
area.
NOTE:
The tip of the heat gun should never be placed closer than 2"
(51 mm) from the deck surface and should be in continuous motion so as
not to permanently damage the surface of the deck board. Do not lay the
heat gun on the decking after use.
Reference:Reference:Reference:
Scalloped Profi le
5.5"
5.5"
0.910"
0.910"
0.910"
Starter Profi le
5.5"
5.5"
0.910"
0.910"
0.910"
Snap&Stay™ strips
Hidden Fastening Clip
BARRETTE OUTDOOR LIVING
7830 FREEWAY CIRCLE
MIDDLEBURG HEIGHTS, OHIO 44130
TEL: (
800) 336-2383
•
WWW.FREEDOMPRODUCT.COM
To obtain and review a copy of the warranty please go to: Freedomproduct.com/warranty.
You can also contact 1.888.418.4400 or write to Freedom Outdoor Living,
7830 Freeway Circle, Middleburg Heights, Ohio 44130 to obtain a copy of the warranty.
To register your product, please visit:
FreedomProduct.com