Installation Guide
4
4
5
6
7
When included in kit, place aluminum insert into bottom
rail, then insert bottom rail into bottom post route hole
of rst post only (Fig. 5). Panels with 7" rails do not
require aluminum inserts.
Attach U-channels to two end boards (Fig. 6).
NOTE:
Attach U-Channel to "tongue" side of rst board, and
"goove" side of last board.
Insert boards into bottom rail ensuring U-channels are
on both ends. Start from rst installed post and work
towards second post (Fig. 7).
For Full Privacy Panels:
Insert the top rail into the rst top hole post route then
guide over top of boards (Fig. 8).
Proceed to Step 15.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
U-Channel
U-Channel
First
Board
Last
Board