Installation Guide

For Open Top Panels with Pickets:

Attach middle rail into left side of post route only then

guide rail over boards. Insert top rail into left post route

holes of  rst post only (Fig. 14).

Insert pickets down through top and middle rail (Fig. 15).

NOTE:

Scalloped and Arched panels have pickets/boards

that are numbered. Start from left side with the #1

picket/board  rst.

Fig. 14

Fig. 15

Apply glue on inside rim of post tops then attach to

posts (Fig. 17). Repeat these steps until completed.

Fig. 17

Insert the completed fence panel into the route holes of

the second fence post. Plumb and level the post and add

concrete according to

manufacturers instructions to top

of hole (Fig. 16).

Fig. 16