Installation Guide

2
Phillips Screwdriver
Safety Glasses
Line Level
Tape Measure
Drill
#2 Square Drive Bit
Gate Hardware (Latch)
TOOLS NEEDED:
BEFORE YOU BEGIN:
Vinyl gate posts require an internal support
system for weight-bearing purposes
therefore a post stiffener is required. Post
stiffener needs to be purchased separately.
WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
Top View of Routed Post
Top View of Routed Post
Fence
Purchased
Stiffener
Lattice Top Gate
Component list:
Description
Lattice
Boards
Top Rail
Middle Rail
Bottom Rail
Gate Uprights
Upright Inserts
Upright Caps
Screws
Lattice Channels
Vinyl Cement
Hinges
Gusset Hardware Kit
Upright
Cap
Lattice
Lattice Channels
Gate
Upright
Upright
Inserts
Hinges
Screws
Vinyl
Cement
Gussets
Boards
Top Rail
Middle Rail
Bottom Rail
Lattice Top
Hinges
NOTE:
Components shown are for visual reference only and may not depict the exact style of
your product. Please see product label for correct number of pieces.
To obtain and review a copy of the warranty please go to: Freedomproduct.com/warranty. You can also
contact 1.888.418.4400 or write to Freedom Outdoor Living, 7830 Freeway Circle, Middleburg Heights,
Ohio 44130 to obtain a copy of the warranty.