Assembly Instruction

Assembly Instructions
Easel TV Stand
Page 1
Care Information
Hardware
Parts
Before you begin to assemble your new tv stand, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline [phone]
(Customers outside Australia should contact their closest Freedom store.)
12xPart A
1xPart G
1xPart L
1xPart N
1xPart O
1xPart P
1xPart B
1xPart C
2xPart D
2xPart E
1xPart F
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.
1xPart H
2xPart I
2xPart J
2xPart K
1 x Spacer X
1 x Spacer Y
small
small
large
large
1xPart M